A non-flushing toilet can be an incredibly frustrating experience, and it’s not something you can simply ignore. Fortunately, there are proactive steps for you to take to troubleshoot the issue on your own. In this article, we’ll provide you with some helpful tips to get your toilet flushing again. Absolute Airflow can also provide toilet repair services if you’re located in Garden Grove, CA, or the surrounding areas. Call us soon to schedule your consultation with one of our technicians.
Why Won't Your Toilet Flush?
There could be many potential reasons why your toilet may not be flushing properly. Some of the most common causes include:
- Clogged drain
- Flapper is not sealing properly
- Broken lift chain
- The low water level in the tank
- Faulty fill valve
Troubleshooting Steps
Before calling a professional plumber in the Riverside, CA, area, you can try some of the following troubleshooting steps:
- Check the Water Level
The water level in your tank should be around an inch below the overflow tube. If it’s lower than that, it could be causing your toilet to not flush properly. Simply adjust the float in the tank to raise the water level to fix this issue. - Check the Flapper
The flapper is the rubber valve that sits at the bottom of the tank. When you flush, the flapper lifts and allows water to flow into the bowl. However, if the flapper is not sealing properly, it can cause the toilet to not flush. To check the flapper, lift the tank lid and flush the toilet. Watch to see if the flapper lifts and seals properly. Suppose it doesn’t replace it. - Check the Lift Chain
The lift chain connects the flush handle to the flapper. If it’s broken or has come loose, it can prevent the flapper from lifting correctly, which will cause your toilet to not flush. Check the chain to make sure it’s attached properly and not too loose or too tight. - Check for Clogs
You may have a clogged drain if your toilet is not flushing. You can try using a plunger to remove the clog. If that doesn’t perform, you may need a toilet auger to clear the blockage.
When to Call a Professional Plumber
You Don't Have To Do It Alone!
A toilet that won’t flush can be a frustrating experience, but with the troubleshooting steps outlined in this article, you can try to fix the issue on your own. If you’re unable to fix the problem, it’s important to invest in professional toilet repair services in Riverside, CA. Remember to also schedule regular maintenance to prevent future issues.
Westminster, CA