A running toilet can be a real headache for homeowners, not to mention the potential damage it can cause to your home and your water bill. When you experience a running toilet in your home, knowing what’s causing it and how to fix it is crucial. Absolute Airflow is here to provide those answers and expert toilet repair services in the Riverside, CA, area. Contact us today and see how our experts can help you!
Common Causes of a Running Toilet
A running toilet is typically caused by a faulty flapper or flush valve, which can prevent water from properly exiting the tank and entering the bowl. The most typical causes of a running toilet are:
- Faulty Flapper: The flapper is a rubber valve located at the bottom of the tank and is responsible for sealing the opening between the tank and the bowl. If the flapper is worn or damaged, water can leak from the tank into the bowl, causing the toilet to run.
- Damaged Flush Valve: The flush valve is the mechanism that controls the flow of water from the tank into the bowl. If the flush valve is damaged, it can prevent water from correctly entering the bowl, causing the toilet to run.
- Water Level: If the water status in the tank is set too high, it can cause water to flow constantly into the overflow tube, leading to a running toilet.
How to Fix a Running Toilet
If you’re experiencing a running toilet, follow these steps to fix the problem. Here’s a step-by-step guide to selecting a running toilet:
- Step 1: Turn off the Water Supply
Before you begin any repairs, turn off the water supply to the toilet. Then, look for the water valve behind the toilet and turn it clockwise until fully closed.
- Step 2: Remove the Tank Lid
Carefully remove the tank lid and set it aside in a safe place. Don’t drop it, as it can easily crack or break.
- Step 3: Check the Flapper
Inspect the flapper for any signs of wear or tear. If there is damage, it must be replaced. To replace the flapper, detach it from the chain and replace it with a new one.
- Step 4: Adjust the Flush Valve
If the flapper does not cause the problem, the flush valve may need to be adjusted. To adjust the flush valve, bend the float arm slightly downward to increase the water level in the tank.
- Step 5: Check the Water Level
If adjusting the flush valve doesn’t solve the problem, check the water level in the tank. The water level should be set about one inch below the top of the flood tube. You can adjust the float arm until the water level is at the correct height if the water level is too high.
- Step 6: Turn on the Water Supply
Once you’ve made the necessary repairs, turn the water supply before on and flush the toilet a few times to ensure it works properly.
Why Choose Us?
If you’re experiencing a running toilet and need professional toilet repair services in Garden Grove, CA, or the surrounding areas, look no other than Absolute Airflow. Our team can diagnose and repair any toilet problem, including a running toilet. In addition to toilet repair, we offer drain cleaning services in Garden Grove, CA, to keep your plumbing system in top condition. Contact us today to request a technician visit or to learn more about our services.